When the printer buzz, insert the filament into the extruder unit gently. 5 Install the guiding tube, insert the filament into guiding tube. When the filament melting temperature is reached, the printer will buzz and begin to extrude. 2 Select the Material from the dropdown material list. For Example: If the nozzle position determined by the paper is 181.5, you have to set the nozzle height to 181.0 LOAD FILAMENT 1 Go to “Maintenance”. 5 Note the current nozzle height and deduct the value of it by 0.5mm and press “set” button to save the value as nozzle height (for printer with raft). At the correct height, the paper should be able to move freely but user should able to feel a small drag from the nozzle. 4 Put a paper in between the Nozzle and Platform, lower the nozzle and feel the drag be- tween paper and nozzle. 3 Use the + button to lower the Nozzle to close proximity of platform. 2 Press button 5 to move the Nozzle to the middle of the build platform. ADJUST THE NOZZLE HEIGHT 1 Go to “Calibration”. 5 Input the password for the Wi-Fi network Note: The computer and printer must be in the same WLAN (same SSID) before connecting. 4 Click the Network dropdown menu to select an available network. SETUP PRINTER 1 Click the Setting icon at the top right corner. Note: Initialization is required every time when the machine is powered on, this is in order to determine the correct position. Start to Print by clicking the print icon on the software main menu.Download and Install Cetus3D software:.2 Connect the Extruder Connector to the Extruder Unit. Install the Extruder Head to the Y Axis 1 Mount the Extruder Unit on the Y-Axis with 2 screws provided on the linear bearing. (2) It is only need to install three screws. There is no need to level the build plate. Note: (1) The device is pre-leveled in factory. Install Build Platform 1 Place the Build Platform on the Main Seat and align the three screw holes. 3 Plug the long plug into the socket on the Y-Axis. 2 Mount the Axis Assembly to the Main Seat with included screws. Install the Axis Assembly to the Main Seat 1 Plug the short plug into the socket on the Z-Axis.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |